Inventory

Model Number M-8485Se, Print & Apply Tamp On Label Application, Capable up to a maximum 5” tall label height, Existing Vacuum Table Plate 10” L x 3.5” H

- Model Number PP30A-ASS-AAA, 3” Ported Powder Transfer Diaphragm Pump, Connection: 3 – 8 NPTF – 1 (with optional Stainless Steel TriClamp Adapters),

 Model 201 RH, Nordson 3500V Hot Glue Unit, 

Model 131-4BIB-3200, Container Dual Pressure Belt Infeed System with Handwheel Adjustment, Includes (4) existing changeover Invertor/Revertor parts

Internal rinsing of glass, metal, plastic or composite containers and bottles, Stainless Steel Construction, Rinse by Air, Vacuum, or Combination Air & Vacuum, 36-Inch Drum Diameter, Simco Static Eliminator, Existing Change Part 28 Pockets 3” On Center,

Model Number C8 I ST-VT-CLIVP-S-I/1P, 316 Stainless Steel Pump Design, Ports 2” Inlet & 2” Outlet with TriClover TriClamp Connections, Maximum Output (m/h) 8, Maximum Temperature (°C) continuous 100, Maximum Pressure (bar) 5, Particle passage (mm) 5, Seal free design, Sanitary & Food applicable, SEW-Eurodrive 1.5 HP Drive Motor, Variable Speed Drive, Electrical Input 110-115 Volt, 1 Ph, 60 Hz, 20 Amp (Output 0-250 Volt, 3 Ph)

(2) In Stock

Model Number 1010, Stainless Steel Construction, Low In, Low Out, Underslung Design, Water Rinse, Rinsing of Round or Non-Round Containers, PET, Glass, Includes “S” Curve Infeed and Discharge Conveyor Sections

- Stainless Steel Construction Frame, 4 Spindle - Capping Quill Wheels, Left to Right Operation, Container Stabilizer Belts,

Model Number PGE-60, Model E Frame (100” L x 68” W), Stainless Steel Construction, Left to Right (Clockwise) Operation, Filling Valve Nozzle 7/8” Diameter, Filling Valve Pitch 3.5”, Last filling hot fill juices & teas,

General Conveyor Inc, Serial Number 206802, Stainless Steel Frame Construction, Eliminates manual sorting, saves time and costs, Jam Proof switching, High Speed Fully automatic operation, Conveyor Elevation 38”, Diverter Table Dimensions 42” Wide x 72” Long

Automatic Operation, Left to Right Container Flow, 8” Wide x 96” Long Stainless Steel Conveyor with Idler End

Model FMC 100/S/2/F, Filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and safety. In automatic mode it is possible to output a signal for control purposes. Flow rate: min. 10 l/min - max. 100 l/min

30-Quart Stainless Steel Bowl Capacity with Pouring Lip, Bowl Tilt Lever, 5 HP Drive Motor, 1140 RPM, Electrical 208 Volt, 3 Ph, 60 Hz,  s

Adjustable Height Unit, Handwheel Adjustment, Adjustable Cap Discharge Height 102” up to 112”, Stainless Steel 20 Cubic Foot Hopper, Dimensions 40” L x 36” W x 24” Deep, 7.5” Wide Cleated Belt, 7.5” Wide x 2” Deep S/S Cleats, 6” On Center,

C Series Close-Coupled Pump, Model C216 18TC, Baldor Electric 5 HP Motor, 3450 RPM, Electrical 230/460 Volt, 3 Ph, 316 Stainless Steel Pump Housing & Impeller, Impeller Diameter 6”, 2” Inlet , 1.5" Outlet with TriClover TriClamp Connections,

Stainless Steel Construction, Water Jet Container Cleaning, Existing Can Twist for 12oz Aluminum Beverage Cans, Invert - Straight - Revert Sections, Overall Dimensions 25 feet long

Model F-4, Serial Number 3689, Stainless Steel Construction Frame, 4 Spindle - Capping Quill Wheels, Left to Right Operation, Container Stabilizer Belts, Electronic Height Adjustment

54 inch tall x 9 inch diameter, Model 910610-000, Type MM28-S, Pressure 150 PSIG @ 200F, SN RW , Type 304 Stainless Steel Construction, 2" in 2" out Tri-Clamp Connections

​

Model Number AIDLIN 2024, Year 2011, RH Cap Discharge, Stainless Steel Construction, Previously running and set for 38mm flat plastic screw caps

Upgraded UV Print Registration, Includes (2) Existing Parts for Round & Square Bottles, Infeed Timing Screw Mechanism, PDC 12 ft. Long Steam Tunnel, 

Model Pur-Rinse, Waterless Container Cleaning, Multi-Stage Air Filtration with Ionization, Stainless Steel Can Twists, Last running and includes twists for 12 oz. & 16 oz. aluminum beverage cans

Year 2011, 24” Wide x 60” Conveyor, Stainless Steel Frame Construction, 24 Inch Wide Plastic Conveyor Belt, Allen Bradley MicroLogix 1400 Programmable Controller, Mitsubishi Variable Speed Control

Model Number VALVE 68ALT 2.5” T6, Part Number SM2-3, 2.5” Tri-Clover Tri-Clamp Connections, Open and Closed Positions

Model Number CF 20 24, Serial Number 99 36 0643, LH Cap Discharge, Stainless Steel Construction, Previously running 83mm flat plastic screw caps, Cap Discharge Height 115”,

• Pressure Sensitive Labeling machine

Fully Automatic Uniform Hot Melt Top Case Sealer, Uni-Drive Synchronized Side Gripper Belts for Case Transfer keeps cases square during sealing, Nordson Series 3400 Hot Melt Glue System, 

Model Number EV1P25, .25 HP Motor, 1725 RPM, CW Rotation, Agitator Shaft 5/8” diameter x 48” long with 4” 3-blace propeller

Model B.H.M. SEALSTAR, Fully automatic continuous motion hot glue top case closer sealer, Factory rated speeds of 20 to 50 CPM (depending on case dimensions), Nordson Series 2302 Hot Glue System,

• Mechanical synchronization

ITT Standard 2-Stage Gasketed Plate & Frame Heat Exchanger Series P14A, Stainless Steel Plate Construction, Plate Dimensions 9” Wide x 32” High, Side One: MAWP 150 PSI @ 302°F, Side One: MDMT +32°F @ 150 PSI, Side Two: MAWP 150 PSI @ 302°F, Side One: MDMT +32°F @ 150 PSI

Includes (2) Dekka Tape Heads for 2” Wide Tape, Snap Folder Flap Folding System, Uni-Drive Side Gripper Belts for Case Transfer, Handwheel adjustment for various length, width and height RSC boxes

Type .CLX05 04 1 050 5, New Condition - Never Installed, Manufacture Date 09/29/2021, Maximum Load: 630 kg (1390 lbs), Height Lift: 16 ft., Power: 0.72 HP, Electrical 480 Volt, 3 Ph, 60 Hz, 10 Amp, Motorized Trolley, Trolley Drive Motor 0.15 Kw (.20 HP), 965 RPM,

8 Quill/Spindle Screw Capping Machine, Stainless Steel Frame Construction, Left to Right Operation – Container Flow, 36” Diameter Rotary Cap Sorter – Feeder, Adjustable Cap Chute, Cap Size Range up to approx. 80mm Diameter,

This Crown 72 Valve Can Filler with Angelus 120L seamer last running carbonated beverages into 12oz. cans @ 1200 cpm, Crown UB72v Can Filler and Angelus 120L Can Seamer, Tubular Steel Common Base with Can Transfer Conveyor included, Existing Tooling for 202 ends / 211 body included,

Model KST80A-714, 110 Inch Long, 6.25” Wide x 14” H Tunnel Opening, Dual Zone, PDC SV-100 Stainless Exhaust Blower, Serial #063, Includes 3.25” Wide x 17’ Long Stainless Steel Conveyor Section,

​

​

​

- Model Number: Cap Sorting Elevator, Left to Right Container Flow, Cleated Belt Waterfall Style Cap Sorter Elevator Feeder, Stainless Steel Construction, 5.25” Distance Between Cleats – Slats, Adjustable Cap Discharge Chute last running 70mm metal & plastic lug caps, Adjustable Cap Discharge Heights, Ranges 44” up to 65”

Model CF-20-24, LH Cap Discharge, Stainless Steel Construction, Previously running and set for 33mm/53mm plastic screw caps, 2.75” Distance Between Belt Cleats/Slats, Cap Discharge Height 162”

Tamp Applicator Feature with 4” Stroke, Minimum Label Width/Height .50”, Maximum Label Width/Height 6.25”, Minimum Label Length .375”, Maximum Label Length Unlimited, Condition: Used-Like New, Never Used

Model Number ML-60, Quadrel Q60/Q65 LH Labeling Head with M2 Controller, Right to Left Product Flow, Capable of applying up to 7.5” tall labels, Includes a 4.5” Wide x 72” Long Stainless Steel Conveyor, Powered Label Wrap Station,

​

​

​

​

Stainless Steel Construction, Container Shapes; Off-center neck bottles, handle bottles, trigger spray bottles, symmetrical bottles with in-mold labels,  center neck non-symmetrical bottles, 118” Long x 4.5” Wide Conveyor with Plastic Table Top Belt

Single or dual lane configurations, Right-Angle Infeed, 32“ Wide Seal Bar, Powered Infeed Conveyor 7.5” Wide x 102” Long, Heat tunnel 60" L x 40" W x 11" H,

Stainless Steel Construction, 34” Conveyor Height,

125 Ton Rotary Liquid Chiller, Model RTWA1254YA01, Water Cooled and Condenserless, Electrical 460 Volt, 3 Ph, 60 Hz

Model 060 UL 2009, Baldor Super-E 3 HP Washdown Duty Motor, 2.5" Inlet & 2.5" Discharge Ports with Tri-Clover Tri-Clamp Fittings, (2) 2.5” to 2” Tri-Clover Reducer Fittings

Model Number 7D/SS, Stainless Steel Construction, Capable of Top or Top & Bottom Case Sealing, Includes (2) Tape Heads for Top & Bottom Case Sealing, 2” Tape Heads

Solo 45 inkjet print head delivers high resolution printing, Marksman HHI Controller, Up to 5 vertical lines of print, Font heights include 1/2", 1/4" and 1/10", Prints logos and barcodes including various 1D types and the 2D data matrix code, Fully featured software including built-in autocodes, such as date, time, count and expiration, Compact, rugged enclosure with hinged cover to protect pen and allow for easy replacement

Connections for (2) Glue Hoses, Electrical 230/400 Volt, 3 Ph, 50/60 Hz, 8/5 Amp, 1800 W.,

Model Number SW30AI, Dorell Equipment Inc. (XPAK) , North Brunswick NJ, Straight Inline Design, 34” Wide Seal Bar with 12” Max. Container Height,

Stainless Steel Construction, 12” Wide White Plastic Cleated Conveyor Belt, 9” Wide x 2” Tall Cleats, 33” On Center, Discharge Elevation 144”,

Conveyor Size 108” L x 42” W, Roller Diameter 3.5”, Roller Pitch 4”, SEW Eurodrive .50 HP Drive Motor,  

Stainless Steel Construction, 33 feet long, right hand, 18” Rexnord Infeed to (9) 4.5” mat-top belts to (1) 4.5" belt single file

- Model Number 9901HT-10HFR2-96x24x12, Manufacturer: Hydraulic Technology Inc., Rocklin California, Max Inlet 50 PSI, Max Outlet 1000 PSI, Stainless Steel Construction, Chamber/Cabinet Dimensions 96” Long x 24” Wide x 14” Deep

130 Gallon Capacity (Tank ID 30” Diameter x 44” Deep), Vessel Max Internal Working Press. 20 PSI @ 300° F, Heat Exchanger Max. Working Press. 75 PSI @ 300° F, Jacket Connections 1.25” NPT, Closed Top Tank with 12” Clamping Manhole Opening, (3) Top Inlet Connections (2.5”, 2”, 2”) TriClover TriClamp Type, Top Entering Lightnin Agitator-Mixer, Model XJC-65, .65 HP, 1725 RPM,

Model Number MPE-300, Speed: up to 20 cases per minute, Right Hand Case, Handwheel Case Size Adjustments, Nordson 3400 Hot Glue Unit,

130 Gallon Capacity (Tank ID 30” Diameter x 44” Deep), Vessel Max Internal Working Press. 20 PSI @ 300° F, Heat Exchanger Max. Working Press. 75 PSI @ 300° F, Jacket Connections 1.25” NPT, Closed Top Tank with 12” Clamping Manhole Opening, (3) Top Inlet Connections (2.5”, 2”, 2”) TriClover TriClamp Type, Top Entering Lightnin Agitator-Mixer, Model XJC-65, .65 HP, 1725 RPM,

505 Case Former Serial Number 505-00752, Pneumatic Operation, 252 Case Sealer Serial Number 252-9588, Includes (2) Dekka 22 Tape Heads for 2” Wide Tape, Snap Folder Flap Folding System, Uni-Drive Side Gripper Belts for Case Transfer,

Conveyor Bed Table Size 48” Wide x 120” Long, Stainless Steel Frame Construction, Plastic Mattop Chain Belt, One Conveyor Direction, Stainless Steel Hood Cover

Stainless Steel Frame Construction, Plastic Intralox Raised Rib Type Conveyor Table Belting , Conveyor Bed 78” Wide x 288” Long, Bi-Directional Type, Product Photo Eye Detection, Adjustable Valu-Guide Side Guiderails,

• Pressure Sensitive Labeling machine

Model 150, Serial Number 150-082876, Factory rated up to 30 cases per minute, Includes (2) Dekka 22 Tape Heads for 2” Wide Tape, Uni-Drive Side Gripper Belts for Case Transfer,

100 Liter Capacity Vertical Vessel, ID 18” dia. X 30” deep, MAWP 50 PSIG @ 302 Deg. F., MDMT -20 Deg. F. @ 50 PSI, Vacuum Design 15 PSI , Material T-316L Stainless Steel Construction , Head Dish Radius 18” Diameter, Jacketed

90° Degree Infeed to Outfeed/Discharge, Counter-Clockwise Rotation - Operation, 24” Case Infeed Height, 102” Case Outfeed/Discharge Height, 10” Wide Plastic Flex Grip Conveyor Chain – Belt, 12” Wide Between Guide Rails

Stainless Steel Construction, Stainless Steel Strainer Basket, Maximum Pressure 300 PSI, Maximum Temp. 400 Deg. F., Housing Dimensions 4.5” Diameter x 24” H

Model Number 7450, Stainless Steel Construction, 12” Wide Cleated Belt with 3” Cleats, 6” On Center, Round Cone Shaped Stainless Steel Hopper 42” Diameter x 28” Deep, Discharge Height 74”

Approximately 30 Cubic Feet Capacity, Stainless Steel Hopper Construction, 6” Wide Cleated Belt with 2” Cleats, 6” On Center, Stainless Steel Cap Hopper 42” L x 42” W x 36” Deep, Cap Discharge Height 134” (adjustable)

Semi Automatic Beer Keg Filling Machine, Stainless Steel Construction 304, Double Station (2 Head Unit), Capacity 50 – 80 kegs per hour (5L)

Stainless Steel Hopper Construction, Cap Hopper ID 45” L x 35” W x 32” D, Integrated Pneumatic Blower, Lexan Hinged Top Covers, Clean Out Door, Uses 4” Diameter S/S Cap Discharge for Transfer Tubing with 90 Degree Curve,

Interior Dimensions 34” Diameter x 45” Deep, Filled Tank Capacity 175 Gallons, Dish Bottom to a 1.5” Center Outlet, Open Top Tank with Stainless Steel Hinged Top Cover, Top Inlets (2) 1.5” & (1) 3”, Side & Bottom Jacketed, Jacket MAWP 150 PSI @ 350° F, Jacket MDMT -20° F @ 150 PSI.

Hemispherical Kettle Bottom with Heat Jacket, Maximum Rated Jacket Working Pressure 125 PSI @ 353°F, 2” Bottom Center Discharge Outlet, Single Motion Scrape Surface Agitation, SEW-Eurodrive 1.5 HP Mixer Drive Motor,  

Food Grade Stainless Steel Tank Kettle, Stainless Steel Frame, Hemispherical Bottom with Heat Jacket, Maximum Jacket Working Pressure 90 PSI, Maximum Jacket Working Temp. 330°F, Tank Capacity 30 Gallons, Single Motion Scrape Surface Agitation, Bodine 3/8 HP DC Drive Motor with Variable Speed Control, Electrical 110 Volt, 1 Ph, 60 Hz,

Stainless Steel Construction, 42 Inch Diameter Stainless Steel Rotary Turntable, Stainless Steel Side Guide Rail, Stainless Steel Side Table 16” Wide x 28” Long,

Model Number PC-1 JC, Stainless Steel Construction, Left to Right Operation, Pick & Place Cap Delivery, Fully adjustable from 7 inch to 14 inch high containers, Includes existing capping chuck for a 58mm plastic screw cap,

​

​

​

​

Previously running a 38mm Dairy/Water Style Snap Cap, Stainless Steel Construction, Rotary Cap Sorter, Clockwise Operation

Model FM4X4, Serial Number 109426, 150 PSI Pressure rating, 250^ F Temperature rating, Rated to 120 GPM, 40” Filter, (4) New cartridge Filters included

​

Model 3D-RP1-8, Eight (8) Pocket (RP = Rotary Pocket), Stainless Steel Construction, Integrated Air Rinser with Static Eliminator, 30 Cubic Ft Hopper-Elevator-Feeder, Includes several sets of existing change parts, 

Freestanding Flomix Proportioning Unit, Pyrex Syrup, Water & Mix Reservoirs, Maximum Output 4,600 GPH total mix, Carbotrol attachment

- 3” Infeed Connection, 1.5” Discharge Connection, TriClover TriClamp Connections, Sterling Electric 7.5 HP Motor, 1770 RPM, Electrical 208 – 230/460 Volt, 3 Ph, 60 Hz,  

- Model S/F HD, Filling applications include filling free flowing to very viscous products, Accommodates a wide range of container shapes and volumes from 1/3 oz to 5 gallons, Stainless Steel Construction, Servo/Fill HD Units equipped with Niagara CleanGear Pump, 

• Pressure Sensitive Labeling machine

Consignment machine located in Texas, Model: Belt Accum. Debagger, Serial Number: 16-728, 48” Wide x 236” Long Accumulation Table,

​

​

​

3.25” Wide x 108” Long Powered Table Top Conveyor, Stainless Steel Frame Construction, 3.25” Wide Plastic Belt Table Top Chain

Serial Number 85E191, Tank Volume Estimate 52 gallons (200 Liters), Stainless Steel Construction, Jacket Heat Exchanger Maximum Working Pressure 75 PSI @ 300° F, Open Top with Removable Hinged Cover, Lightnin Clamp On Mixer – Agitation, Model XJ-65, .65 HP,

Serial Number AT30-570, Stainless Steel Construction, 30 Inch Diameter Stainless Steel Rotary Turntable, Stainless Steel Side Table 29” Wide x 26” Long

​

Bottle Filler & Capper for Carbonated Soft Drink Beverages, Model UB60/12, Alcoa 12-Head Cap-In-Head Plastic Screw Capper, (2) Rotary Cap Sorters for Plastic Screw Caps, Last running 28mm Flat & 28mm Sport Screw Caps

Model Number 40” Load TT, Stainless Steel Construction, 40” Diameter Stainless Steel Top Disc, Penta-Drive Speed Controller with On/Off, Electrical 110 Volt, 1 Ph, 60 Hz

Model KST55A-712, Year 2018, Single Zone Steam Tunnel, Overall Length: 55”, Opening Size: 7” x 12”, Stainless Steel Construction, 3.25" wide x 14' long powered conveyor with drip pans,

Jacketed with Hemispherical Bottom, Jacket Pressure Rating: 40 PSI @ 300 deg. F, Top Entering Sweep Agitation mounted to Stainless Steel Bridge, .50 HP Agitation Drive Motor

Model Number M EURO.PK.VA, Application: (ROPP) Roll On Pilfer Proof Aluminum Caps, 12 Head Rotary Freestanding ROPP Screw Capper, Presently Set for 28mm ROPP Beverage Caps

Consignment machine located in Texas, Table Dimensions 60” Wide x 192” Long, Manufacturer: Alliance Industrial Corp., Lynchburg VA, Stainless Steel Frame Construction, Plastic Raised Rib Type Conveyor Table Belting, Bi-Directional Type

Model Number 1SS1F7H0, Imp. Diameter – 3.94, S/S Contact parts, Baldor 1.5 HP / 3450 RPM

Model Number DU-18, Manufacturer: Parts Feeders Inc., East Hartford CT , Stainless Steel 18” Diameter Sorter Bowl/Spiral, Mild Steel Powder Coated Frame Stand, Variable Speed Controller

Includes (2) Dekka 22 Tape Heads for 2” Wide Tape, Snap Folder Flap Folding System, Uni-Drive Side Gripper Belts for Case Transfer

Model 300-CP-HD, Vacuum Pick and Place Type Packer, Dual Case Packer packs 2 cases at a time , Soft Packer with Vacuum Lowering Head (grips containers with vacuum and lowers into case or tray), Includes Existing Change Parts for (Dual) One Gallon Containers, 2 x 2 Case Pattern (14.5” x 11”)

(3) 2-Way & (3) 3-Way design, 1.5” TriClover TriClamp Connections

The ARPAC 708HBD-32 shrink bundler is designed specifically for today's health and beauty industry. Ultra-compact in design, the 708HBD-32 is capable of shrink wrapping up to 50 bundles per minute in the dual lane configuration. This machine offers the flexibility of running in a dual lane mode for higher output, or in a single lane mode to accommodate wider bundles. Product Range Minimum 3/4” W x 3/4” L x 1/2” H, Maximum 6” W x 11” L x 8” H, Package Range Minimum 3.5” W x 3/4” L x 1/2” H, Maximum 10.5” W x 10” L x 8” H

​

Capacity 200 Gallons, Inside Tank Dimensions 36” Diameter x 54” Deep, Single Wall Stainless Steel Sanitary Construction, Bolt On Removable Top Cover Lid with ¼ Hinged Access, Top Entering CIP Ball, Coned Bottom to Center 3” Outlet with Tri-Clamp Connection, 3” Stainless Steel Ball Valve (Outlet)

SN EE-1000-211, 32" Dia Sorting Bowl, 6” Cleated Belt on Hopper-Elevator, S/S Bottle Hopper 30” L x 18” W x 32” D, Bottle Orientation Hook Feature, Lexan and S/S Guarding, Adjustable Electronic Variable Speed Controls