Inventory

Cask Model ACSV6 (6) Head Canning Line, Year 2022, Set for 202 diameter can lids, Cask Model DPL-300 Can Depalletizer, (2) Twists Changeover Parts for 12oz and 16oz Standard Cans

‍

The PTA is an off-packing solution that automates applying PakTech® brand can carriers so operators have the ability to focus on more quality-driven activities like filling. Users can quickly and easily switch between 4-packs and 6-packs using provided stop blocks. Change kits are available for standard, sleek, and slim diameter cans. - Model acm02, year 2022, 6” Wide x 54” Long Powered Conveyor, Factory rated 120 cans per minute, Handles PakTech® brand 6-packs

Model Number 700r, Type 19000, Dual Top & Bottom Case Gripper Belts, (2) 3-Inch Case Tape Heads for Top & Bottom Case Sealing, AccuGlide Taping Heads, Factory Rated Speeds up to 15 boxes per minute (depending on box size) 

‍

Artisan Rototherm® Horizontal Agitated Thin Film Evaporator, Thin Film Evaporation Pilot Plant, Artisan Rototherm Model E One Square Foot with Vertical Condenser, Premix Product Tank & Pump Skid with Apache Stainless Equip. Corp. 25 Gallon Mix Tank, 18 KW Electric Thermal Fluid Heater Skid, Includes Siemens Motor Control Panel,

‍

Model: Strate Line, Soft Packer Design (Pick & Place Bottles), Small Footprint Design, Factory Rated Up To 8 Cycles Per Minute, Includes Lanes for up to 4 lanes wide of product, Includes (3) Existing Change Parts for (1) 330ml 4x6, (2) 375ml 3x4, (3)750ml 3x4,

Model 38800, Dual Top & Bottom Case Gripper Belts, (2) 2-Inch Case Tape Heads for Top & Bottom Case Sealing, 3M-AccuGlide Taping Heads, Tape Roll Diameter up to 15.5” maximum, Factory Rated Speeds up to 12 boxes per minute(depending on box size, weight) 

‍

Type 19300, Dual Top & Bottom Case Gripper Belts, (2) 3-Inch Case Tape Heads for Top & Bottom Case Sealing, 3-M AccuGlide Taping Heads, Tape Roll Diameter up to 16” maximum, Factory Rated Speeds up to 15 boxes per minute(depending on box size, weight) 

‍

12 Adjustable Nozzle/Jets for 12 bottles per cycle, Adjustable cycle timing, Recirculating Diaphragm Pump, Includes Accu-Veyor 4.5” Widex 15’ Long Powered Conveyor

Model Bottle Orient, Stainless Steel Construction, Includes Integrated Bulk Hopper Elevator Feeder, Includes 2 existing change part bowl discs,

Wet grinding mill used for paints, inks, carbons, dyes, cosmetics, pharmaceuticals, magnetic coatings. Model/Type: 50 Liter Mill, 3 Gallon Minimum, 13 Gallon Maximum,  10 HP Drive Motor,

Stainless Steel Construction, Dump Section 22” Wide x 42” Long, Guide Rails, Conveyor 4.5” Wide x 48” Long with Idler End

Series 360Applicator, Merge Wipe On Type Label Applicating, Right Hand Label Applicator (Left to Right Product Flow), 6” Wide x 120” Long Powered Conveyor with Adjustable Guiderails, Existing Label Peel Plate 5” Tall, Includes Norwood RS-1100 Hot Stamp Coder

Smart Metal Detector – Food Needle Detector, Type: Food Metal Detector, Model Number YH-605, Aperture Opening Size 13.75” Wide x 3.5” Tall x 12” Long, Aperture Clearance with Conveyor 12.75” Wide x 2.375” Tall, Powered Conveyor 12.75” Wide x 60” Long

Model NumberTF-200Q, Speeds up to 35 trays per minute, Allen Bradley MicroLogix 1200 Processor, Nordson 3500V hot meltadhesive system

‍

Model Number LD7D/3, Capable of Top & Bottom Case Sealing, Includes (2) Tape Heads for Top & Bottom Case Sealing, 3” Tape Heads,

Model SKT48A, Mild Steel Painted Frame, 48” Diameter Stainless Steel Top Disc, Electrical 110 Volt, 1 Ph, 60 Hz  

‍

Model Number 00-001-000, Timed flow volumetric type filler, Factory rated up to 100 cpm, Fill Size Range 0.33oz – 16oz (10ml – 475ml), (6)  " Diameter Stainless Steel Filling Nozzles with Individual Flow Controls, Semi-Auto Operation

Model Auto Pinch 25, Automatic timed flow volumetric type filler, Capable of filling water, thin liquids to light oils and creams, Product Viscosity Range, under 1 cps to 1000 cps, 4.5” Wide x 120” Long Variable Speed Powered Conveyor, Fill Size Range 1oz – 64oz (30mL – 1.89L)

Model 500 MS188TBS, Factory Rated 500 GPH, Max. Work Design Pressure 8000 PSI, Twin Stage, 50 HP Motor,

FOR REPAIR OR PARTS NOT WORKING, Model NumberCVC302C, Wrap Aroundand/or Spot Label Application, Stainless Steel Construction, Left to Right Container Flow,  Servo Motor Controlled with Panasonic Controller, TouchScreen HMI, 4" Wide x 130” Long StainlessSteel Inline Conveyor, 6" Maximum Label Height, Label Unwind Position #4, 5.5” Tall x 15” Long Wrap Belt Assembly with FoamBacking Plate

8 Head Gravity Inline Filler with Timed Gravity Type Filling, Suitable for Filling Water-Thin and/or Foamy Products, 8 Inline Filling Valves Adjustable for Various Size Containers, Left to Right Container Flow, 10 Gallon Stainless Steel Overhead Product Tank with Float Controls, (4) Product Pumps (2 valves per pump), 4“ Wide x 120“ Long Powered Bottle Conveyor,

Model 42-TT, Stainless Steel Construction, 42” Diameter Stainless Steel Top Disc, Adjustable Guide Rails, Electrical 110 Volt, 1 Ph, 60 Hz  

‍

Inventory Number: 50284
Model SK6000-15, Serial Number SC 13556, 6 Capping Spindle – Quill Wheels, Adjustable Cap Chute for Various Cap Sizes (18mm to 120mm), “C” Frame Design for Easy Integration with ExistingConveyor

‍

Inventory Number: 50285
Model SK6000-15, Serial Number SC 13550, 6 Capping Spindle – Quill Wheels, Adjustable Cap Chute for Various Cap Sizes (18mm to 120mm), “C” Frame Design for Easy Integration with ExistingConveyor

‍

Inventory Number: 50240
Model Number U300T, 3-Speed Heavy Duty Planetary Mixer, Includes 30-Quart Stainless Steel Bowl, ¾ HP Drive Motor, 1725 RPM, Electrical 115 Volt, 1 Ph, 60 Hz, Includes (3) Attachments (shown in pictures)

‍

Model Number: 48 TEB 002, Rotary Cutter System, Touch Screen Controls, Phase Fire Electric Heat Tunnel, Accutek Powered Table Top Bottle Conveyor 4.5” Wide x 10’ Long

Inventory Number: 50281‍

Model B057, Serial Number 148, Stainless Steel Hopper Construction, Cap Hopper ID 45” L x 35” W x 32” D, Integrated Pneumatic Blower

Inventory Number: 50280
Model Number CR6000, Heat Tunnel for Shrinking Neck Bands on Bottles, Tunnel Length 22-Inches, Tunnel Opening 6” Wide x 4” High, Includes Adjustable Stand, Handwheel Adjustment, Electrical 220 Volt, 1 Ph, 60 Hz, 30 amps

Inventory Number: 50279‍

Model Number SVS, Stainless Steel Construction, Semi-Automatic Volumetric Piston Filler, Fill range from fractional ounces to 157 Ounces (4.6L) with cylinder change, Fills products from liquids to gels and pastes, Two types of machine cycle start, auto cycle mode and single foot pedal, Pneumatically powered, 30 Liter Stainless Steel Tank/Hopper  

Inventory Number: 50278‍

Belt Size 4’10”Wide x 15” Long, White Plastic Belting, Mild Steel Painted Frame, Removable Side Guides 16” H x 120” L,

Inventory Number: 50277
Model SCARAB-350, Fully Automatic Intermittent Motion Sleeve (Bullseye) Wrap, Factory Rated up to 12 cycles per minute, Wraps individual product, pads or trays, multipacks,

Inventory Number: 50276

72” Long Infeed Conveyor with Center Lugs/Cleats, 4” Tall Lug Cleats, 18” Apart, Adjustable Side Guide Rails adjust from 3.25” to 16” Wide, Stainless Steel Top Covers & Guide Rails, Conveyor Elevation 33”, (4) Threaded Leveler Legs, Allen Bradley PowerFlex 4 Variable Drive,

Inventory Number: 50275

Model 73CM356-03050ACC0Z0621, Stainless Steel Frame, 14” Wide White Plastic Food-grade Belt, 2“ Cleats, 24“ On Center, 2” Flexible Side Belt Guides, 24” Infeed Conveyor Height (12” raising adjustment), 68”Discharge Conveyor Height (12” raising adjustment), Adjustable Height Conveyor (12” adjustment)

InventoryNumber:50274

Model Number L-18ARPAC Hanagata, Package Length 4” – 18.5”, Package Width 1.5” – 15”, Package Height .25” – 6”, Maximum Film Width 24” CF, ARPAC Vision Series Electric Heat Shrink Tunnel, Model VT122248, Tunnel Opening 48” L x 25” W x 12.5” H

InventoryNumber:50273

Model Number C8, 8 Capping Quill Wheels, Left to Right Operation – Container Flow, 36” Diameter Rotary Cap Sorter – Feeder, Pick-Off Style Cap Delivery, Adjustable Cap Chute, Cap Size Range up to 70mm Diameter

InventoryNumber:50272

‍

Wrapper Model T2215L SPARTAN, Maximum Package Size 19” L x 15.5” W x 5” H, Minimum Package Size 4” L x 2” W, Maximum speed up to 30 packages per minute depending on package size, Maximum Film Width 28” (folded film)

InventoryNumber:50271

Model Number DPI, Straight Inline Design, Factory rated up to 28 CPM (depending pack pattern, case size), 15” Plastic Conveyor Belt with Stainless Steel Lanes, Integrated Powered Belt Case Discharge, (5) Stainless Steel Lane Dividers for up to (4) Lanes of Product, Lane divider,

InventoryNumber:50270

‍

Model TB1, Fully automatic case sealer with pneumatic rear flap kicker closer arm, 3M AccuGlide-2+ Tape Head for 2-Inch Tape,

InventoryNumber:50269

‍

Model Number 4500, Rated speeds up to 45 cpm depending uponpackage details and specifications, Speed depends on case size, pallet size, product per layer, Electrical: 480 Volt, 3 Ph, 60 Hz, 80 Amp, Allen-Bradley SLC 5/04 Processor, Allen Bradley 1336 and Powerflex VFDs

InventoryNumber:50268

‍

Model Number 5-16, Stainless Steel Construction, 60” Wide x 190’ Long Belt, Plastic Raised Rib Type Conveyor Belting, 15” Container Height Clearance  

‍

InventoryNumber:50266‍

Model T-E145SSL-012 Servo Side Seal Wrapper, Maximum Package Size; 4” H x 14” W x Infinite Length, Conveyor Speed up to 200 feet per minute, Maximum Film Width 24” center folded, Double Chamber Heat Shrink Tunnel, Model T1322/2 Tunnel,
‍

Inventory Number: 50249
GAI Model 3001T Monoblock Bottle Sparger, Filler & Corker, 1 head Sparger, 16 valve Rotary Bottle Filler, 1-Head Corker, Includes Cork Hopper Feed System

‍

Inventory Number: 50254
Model CAPPER NT with Elevator Sorter-Feeder, Stainless Steel Construction, Left to Right Operation, Adjustable Cap Chute ranges from 20mm up to 120mm, Waterfall Style Cap Sorter-Feeder, Stainless Steel Cap Hopper 40” L x 12.5” W x 28” D, Includes 4.5” Wide x 15’ Long Conveyor Section

Inventory Number: 50259
Model: Semi-Automatic Depalletizer, Stainless Steel Construction, 48” Wide x 120” Long Stainless Steel Accumulation Table, Layer Clamping for Smooth Transition,  Manual Layer Transfer, Plafolift Hydraulic Scissor Lift Table, 62” L x 48” W Platform Table

Inventory Number: 50261
Model T.T.E-36, Manufacturer: Charles Lapierre Inc., QC, Stainless Steel Construction, 36” Diameter Stainless Steel Top Disc, Adjustable Top Guide Rails, 24” L x 24” W S/S Side Feed Table

Inventory Number: 50250
Approximately 3000 Gallon Capacity, Manufacturer: Quality Tank Solutions, Year of manufacture 2021, National Board #54, ASME Certified, 2-Zone Jacket, Vessel-Shell    MAWP 25 PSIG @ 200°F - MDMT -20°F@ 25 PSIG, 316 Stainless Steel Construction

Inventory Number: 50258
Condition: New, Model TKD-50G, Manufacturer: G&F Manufacturing Co., Inc, 50 Gallon Capacity Vertical Open Top Mixing Tank, Clamp-On SPX-FLOW Lightnin Mixer – Agitation, Model EV1P25,

Inventory Number: 50255
Model CAPMATIC 360/9P, Left to Right (Clockwise) Operation, Pick & Place T-Cork Delivery, Factory rated speeds; Minimum 3,000bph / Maximum 15,000bph, MBF Rotary T-Cork Sorter, Includes Fowler Model BDC-20 T-Cork Hopper Elevator Feeder

Inventory Number: 50257
Lattner 150HS Skid Package Electric Steam Boiler, New Old Stock, Never used and still on original skid, 15 HP 150 KW

‍

Type WARMER (8’ X 15’), Model M8-2, Stainless Steel Construction, 96” Wide x 180” Long Belt, Plastic Intralox Type Conveyor Belting, Includes Infeed andDischarge Conveyor Sections

‍

Inventory Number: 50248

Model PI3300, 8 Pistons approx. 32 oz. per stroke, Multi-Stroke Feature, Filling Options Up, Bottom Up, Down, 304 Stainless Steel Construction, .50 Diameter Filling Nozzles, Nozzle spacing fully adjustable, 4.5” Wide x 96” Long Powered Conveyor,

Inventory Number: 50264
Model Number M150, Stainless Steel Construction, Presently set for Air Rinse, Handwheel Adjustment for Various Size Containers, 3.25” Wide Table Top Conveyors, Includes Infeed/Discharge Conveyor Sections with 45° Curves

Inventory Number: 50238

‍
Model PREMIER TABLE, Stainless Steel Construction, 42” Diameter Stainless Steel Top Disc, Penta-Drive Speed Controller with On/Off, Electrical 120 Volt, 1 Ph, 50/60 Hz  

‍

Model Number A-606-SS, Stainless Steel Construction, 72” Wide x 114’ Long Belt, Plastic Conveyor Belting, 12” Container Height Clearance, Overhead Spray Nozzles

‍

Inventory Number: 50241

‍

Model Number 212-4, 4-Head Rotary Cap-In-Head (Pick & Place) Type Capper, Presently Set for 38mm Round Plastic Screw Caps, 24” Diameter Rotary Cap Sorter

Inventory Number: 50233

Model Number 250, Stainless Steel Construction, Low In, Low Out, Underslung Design, Handwheel Adjustment for Various Size Containers, Water Rinse, Includes “S” Curve Infeed and Discharge Conveyor Sections

Inventory Number: 50232
Model Number FG-185, Stainless Steel Construction, Left to Right Operation, 18 Valve Gravity Type Bottle Filler, Gallon) Pitch / Centers, 5 Head Rotary Screw Capper presently set for 28mm Flat Plastic Screw Caps, Rotary Cap Sorter Feeder, (3) Sets Existing Bottle Change Parts,

Model Number Q300, Factory rated 25-35 loads per hour, Maximum Load Wrap Height 80”, Maximum Load Weight 4000 lbs, Electrical 120 Volt, 1 Ph, Low Profile, Includes (1) Ramp

‍

Inventory Number: 50228
Powered Conveyor Section 4 Inch Wide x 72 Inch Long, Stainless Steel Construction, 4” Wide Plastic Table Top Belt, Dart Variable Speed Control,

Inventory Number: 50226
Model 7140, Powered Conveyor Section 4" Wide x 124" Long, Stainless Steel Construction, 4” Wide x 124”Long Plastic Table Top Belt

Inventory Number: 50230Hankin Ozone Systems, 24” Diameter x 144” Tall Stainless Steel Contact Tank, 1000 Liter Tank Capacity, Flow Rate 20 m3/h (5283 gallons per hour), 3 minute contact time

‍

Model Omni-Line M-500, Stainless Steel Frame Construction, Right-Hand Configuration (Left to Right Container Flow), Includes (4) existing change parts, Includes 75 CF Stainless Steel Hopper Elevator

Inventory Number: 50096

Aperture Size 5” Wide x 10” Tall x 14” Long, Aperture Clearance 5” Wide x 9” Tall, 3” Wide x 72” Long Powered Conveyor with Plastic Conveyor Belt

‍

Inventory Number: 50218

‍

Model Portable Filler/Capper, Monobloc 1/1 Filler-Capper, 1-Head Piston Filler Doser, Filamatic Piston/Pump Size 130, 1-Head Rotary Cap Tightener, Stainless Steel Construction, Last Filling a 1.5” Round Bottle, Existing Capper Chuck for 28mm Screw Cap,

Inventory Number: 50216

‍
Model WLA-2 PRO-LABEL, Stainless Steel Construction, Left to Right Product Flow, Label Peel Plate 5” Tall, Label Size Range ½” – 10” Long, Product/Container Width ½” – 6”, Wipe On Label Application, Speed Controls, 6” Wide x 72” Long Powered Conveyor,

Inventory Number: 50213

‍
Model Number UN36, 36” Diameter Stainless Steel Top Disc, 3” Stainless Steel Side Table Guide Rails, Stainless Steel Construction, Variable Speed Drive,

Inventory Number: 50214

‍
Model Number ECOCAP4-C, Stainless Steel Construction, 8 Capping Spindles – Quill Wheels, Adjustable Cap Chute, Vibratory Cap Sorter, “C” Frame Design for Easy Integration with Existing Conveyor,

‍

Inventory Number: 50222

‍

Model NQA20, Year 2017, Self-Contained Portable Air Cooled Water Chiller System, Cooling Capacity 20 Tons  , (2) 10 HP Compressors , (2) 4.3 HP Condenser Fans, (1) 10 HP Pump, Refrigerant: R-410A (18 lb), Minimum Temp. 20°F - Maximum Temp. 80°F

Inventory Number: 50234

‍

Tunnel Opening: 42” L x 17” W x 8.5” H, Stainless Steel Conveyor Belt Size: 60” L x15” W, Digital Temperature Controller, Tunnel Blower

Inventory Number: 50242

‍

Model: NINON, Year of manufacture 2019, Capable of applying upto 6.5” tall labels, Wipe On Label Application, Will apply spot, partial wrap or wrap around pressure sensitive labels, Container Encapsulator Wrap Station, Touch Screen Operator Interface, Powered 3.25” Widex 102” Long Stainless Steel Powered Conveyor

Model FPR712-13, Stainless Steel Construction, Sterling Electric 3 HP Motor, 3490 RPM, Electrical 230/460 Volt, 3 Ph, Impeller Diameter 4.5”, 2” Inlet with TriClover TriClamp Connection, 1.5” Discharge with TriClover TriClamp Connection

Inventory Number: 50005

Model Number PD 700 MB, (2) Labeling Heads for Body & Neck Labels, Will apply spot, partial wrap or wrap around pressure sensitive labels in addition to neck labels, 4.5” Tall x 14” Long Wrap Belt Station, Trunnion Style Label Wrapping, Hot Stamp Coder attachment for Lot/Date Info, Starwheel Container Spacing Indexing Wheel, 4.5” Wide x 120” Long Powered Conveyor,

Inventory Number: 50012

Model Number RP2514BFT, Left to Right (Clockwise) Operation, Capable of Bottom Up Filling, Timing Screw Container Infeed, 4.5” Wide x 120” Long Stainless Steel Pull Through Conveyor, Sanitary Stainless Steel Pistons

Inventory Number: 50013

Model FPD4PERI Peristaltic Filler, Stainless Steel Construction, (8) Filling Nozzles, 50 Gallon Product Tank, MasterFlex Peristaltic Pumps, Operator Touch Screen Interface Control Panel, 4.5” Wide x 120”Long Powered Stainless Steel Conveyor with Plastic Belting

Inventory Number: 50015

‍

Model SK8000-SP, Serial Number IN16256, Stainless Steel Construction , 8 Capping Spindle – Quill Wheels, Adjustable Cap Chute (18mm to 120mm), “C” Frame Design for Easy Integration with Existing Conveyor, Left to Right Container Flow

‍

Inventory Number: 50018

‍

Model NT, New 2021, Manufacturer: Inline Filling Systems Inc, Stainless Steel Frame Construction, Right to Left Operation, Last Running 28mm & 38mm plastic screw caps, Adjustable Cap Chute, Touch Screen Operator Interface, Variable Speed Controls, Waterfall Style Cap Sorter-Feeder,  

Inventory Number: 50019

‍

Model40-Inch Table, Manufacturer: E-PAK Machinery Inc, Stainless Steel Construction, 40” Diameter Stainless Steel Top Disc, Penta-Drive Speed Controller with On/Off,  Electrical 110 Volt, 1 Ph, 60 Hz  

‍

Inventory Number: 50021

‍

Series 605, Serial Number K403018, Year 2013, (2) labeling modules for pressure sensitive labeling, Capable of front, front & back or wrap around labeling, Krones Checkmat Label Inspection, Keyence Electronic Bottle/Container Orientation

Inventory Number: 50024

‍

Powered Conveyor Section, Stainless Steel Construction, 4” Wide Plastic Table Top Belt, Adjustable Conveyor Guide Rails, Variable Speed Controls, Electrical 110 Volt, 1 Ph,

Inventory Number: 50026(A/B)

‍

Automatic Feeder Company Inc, Stainless Steel Construction, Hopper Measurements 42” L x 42” W x 26” Deep, Approximately 20 Cubic Feet Capacity, 9” Wide Cleated Belt with 2” Tall Cleats 6” On Center, Dimension Floor to Cap Discharge Height 90” +/-,

Inventory Number: 50027

‍

Model 4 Spindle Capper, 8 Capping Quill Wheels, Stainless Steel Frame Construction, Right to Left Container Flow , Adjustable Cap Chute (up to 120mm diameter caps),  Includes E-PAK Waterfall Style Cap Hopper Sorter, Model Cap Sorting Elevator, 10” Wide Cleated Belt, 3.25” Distance Between Cleats, Adjustable Cap Discharge Chute - Adjustable Cap Discharge Heights,

Inventory Number: 50028

‍

Series 605, Capable of front, front & back or wrap around labeling, Right to Left Operation, Keyence Electronic Bottle/Container Orientation, Touch screen operator interface, Allen Bradley controls, Includes existing change parts,

Inventory Number: 50031

‍

Model Number Paradigm700, Stainless Steel Frame Construction, Capable of applying 1” to 5” tall labels, Present Label Peel Plate 5” tall, Will apply spot, partial wrap or wrap around pressure sensitive labels, Hot Stamp Coder attachment, Container Spacer / Indexing Wheel,

Inventory Number: 50033

‍

Model NT, Stainless Steel Frame Construction, Adjustable Cap Chute, Cap Size Ranges up to 120mm, Side Grip Belts, Electronic Height Adjustment, Left to Right Operation.

Inventory Number: 50036

‍

Pneumatic Drive with Foot Petal Switch, Semi-Automatic Operation, Stainless Steel Frame Construction, 5/16” Diameter Filling Nozzle, Piston Dimension 1.25” Diameter x 16” Long, Stainless Steel Hopper, 9” diameter x 9” deep, Hopper Agitator-Mixer (110 Volt, 1 Ph, 60 Hz)

Inventory Number: 50039

‍

Stainless Steel Frame Construction, 48” Diameter UMHW Plastic Top Disc, DC Drive with Variable Speed Control

Inventory Number: 50040

‍

Model TDC0018, Type: Combiner, Serial Number 904835-SMMM0327, Year 2007, Table Size 96” Long x 64” Wide, 36” Wide Case Slats, Present Conveyor Height 30” (adjustable),

​

Inventory Number: 50041

‍

Model Number SHA600 (B-600), Left to Right or Right to Left Container Flow, 16 Gallon Capacity Stainless Steel Hopper with Cover, 4-Head Filling Manifold Adaptor, Factory rated production speeds up to 120 CPM dependent on material & application, Last used in the food industry,

‍Inventory Number: 50042

‍

(1) Labeling Head for Spot or Wrap Around Labeling, Capable up to 7.25” Tall Labels max., Stainless Steel Construction, 3.25” Wide x 94” Long Stainless Steel Conveyor with Plastic Belting, (2) Infeed Container Spacing Separation Indexing Wheels, Powered Wrap Station 6” Tall x 16” Long with Foam Backing Plate, Dual Chain Type Container Centering Device, Top Container Hold Down Belt x 30” Long, SelfSet® Auto Adjusting Set Up Operator Controls and E-Stop, 

Inventory Number: 50043

‍

3M-Matic Side Belt Adjustable Case Sealer, Dual Side Case Gripper Belts, (2) AccuGlide 2-Inch Case Tape Heads for Top & Bottom Case Sealing, Factory Rated Speeds up to 28 boxes per minute (depending on box size).

Inventory Number: 50044

‍

Model Number BAO 5000, Factory rated speeds (up to) 450 BPM, Bottle Size Range (Min-Max) .33 oz (10mL) to 2.5 gallons (9.5L), Container Shapes; Off-center neck bottles, handle bottles, trigger spray bottles, symmetrical bottles with in-mold labels,  Center neck non-symmetrical bottles, Powered Conveyor with 4.5” Wide Plastic Table Top Belt

Inventory Number: 50045

‍

Model Number SUPERTAPER 1M, Mainly Stainless Steel Construction, Capable of Bottom Case Sealing, Includes (1) Tape Heads for Bottom Case Sealing, 2” Standard Tape Head

Inventory Number: 50047

‍

Lot of 8 heads, Includes pressure blocks, push out rods, spreader inserts, assembly jig,

Inventory Number: 50048

‍

New 2011, In-line design allows closing and sealing without carton turning, reducing potential for malfunctions and costly downtime, Speeds of up to 90 cartons per minute, Nordson Hot Glue System,

Inventory Number: 50049

‍

Model Number SUPERTAPER 1M, Mostly Stainless Steel Construction, Capable of Top & Bottom Case Sealing, Presently set for Top Case Sealing only, Includes (1) Tape Heads for Bottom Case Sealing, 2” Standard Tape Head

Inventory Number: 50052

‍

Serial Number 4172, National Board Number 4173, Max Working Pressure 350 PSIG @ 300 Deg F, Filter Housing Dimensions 12" Diameter x 72" High

Inventory Number: 50053

‍

‍

Inventory Number: 50054

‍

Stainless Steel Construction, 42 Inch Diameter Stainless Steel Rotary Turntable, Center Guide, 1.25” Tall Stainless Steel Side Guide Rail, Stainless Steel Side Table 16” Wide x 28” Long,

Inventory Number: 50055

‍

6” Wide Smooth White Belt x 144” Long, 36” Conveyor Elevation (adjustable), Stainless Steel 3” Tall Side Guide Rails, 7.5” Distance Between Side Guide Rails

Inventory Number: 50056

‍

‍