Inventory

Model Number A-606-SS, Stainless Steel Construction, 72” Wide x 114’ Long Belt, Plastic Conveyor Belting, 12” Container Height Clearance, Overhead Spray Nozzles

‍

This extended side belt drivenUniform CaseSealerpropels cartons through a folding section, then folds all majorflaps and one upper flap. Repetitive motion is reduced and productivity is increased with this innovative Case Sealerdesign, Model Number SP-304, Capable of Top & Bottom Case Sealing, Includes (2) Tape Heads for Top & Bottom Case Sealing, 2” Standard Tape Heads

Model Number 212-4, 4-Head Rotary Cap-In-Head (Pick & Place) Type Capper, Presently Set for 38mm Round Plastic Screw Caps, 24” Diameter Rotary Cap Sorter

Inventory Number: 50233

Model Number 250, Stainless Steel Construction, Low In, Low Out, Underslung Design, Handwheel Adjustment for Various Size Containers, Water Rinse, Includes “S” Curve Infeed and Discharge Conveyor Sections

Inventory Number: 50232
Model Number FG-185, Stainless Steel Construction, Left to Right Operation, 18 Valve Gravity Type Bottle Filler, Gallon) Pitch / Centers, 5 Head Rotary Screw Capper presently set for 28mm Flat Plastic Screw Caps, Rotary Cap Sorter Feeder, (3) Sets Existing Bottle Change Parts,

Model Number Q300, Factory rated 25-35 loads per hour, Maximum Load Wrap Height 80”, Maximum Load Weight 4000 lbs, Electrical 120 Volt, 1 Ph, Low Profile, Includes (1) Ramp

‍

Inventory Number: 50228
Powered Conveyor Section 4 Inch Wide x 72 Inch Long, Stainless Steel Construction, 4” Wide Plastic Table Top Belt, Dart Variable Speed Control,

Inventory Number: 50227
Powered Conveyor Section 4 Inch Wide x 120 Inch Long, Stainless Steel Construction, 4” Wide Plastic Table Top Belt, Variable Speed Control,

Inventory Number: 50226
Model 7140, Powered Conveyor Section 4" Wide x 124" Long, Stainless Steel Construction, 4” Wide x 124”Long Plastic Table Top Belt

Inventory Number: 50229
Powered Conveyor Section 4.5”Wide x 120” Long, Stainless Steel Construction, 4.5” Wide Plastic Table Top Belt, Penta-Drive Speed Control

‍

Inventory Number: 50230Hankin Ozone Systems, 24” Diameter x 144” Tall Stainless Steel Contact Tank, 1000 Liter Tank Capacity, Flow Rate 20 m3/h (5283 gallons per hour), 3 minute contact time

‍

Inventory Number: 50225
Model Number 26-ST45-SAO, Stainless Steel Frame Construction, 4.5” Wide x 120” Long, 4.5” Wide Plastic Table Top Conveyor Belt    

‍

‍

65 feet of straight running table top conveyors, (3) 90 degree curves, (4) 3.25" to 3.25" crossover sections, legs, guide rails, plastic table top conveyor chain,

Model Omni-Line M-500, Stainless Steel Frame Construction, Right-Hand Configuration (Left to Right Container Flow), Includes (4) existing change parts, Includes 75 CF Stainless Steel Hopper Elevator

Inventory Number: 50223
Model ST-3 7.5, Stainless Steel Construction, Tunnel Length 40-Inches, Tunnel Opening/Entrance 9.5” Wide x 24” H, Includes TRIpack 4.5" Wide x 120" Long Stainless Steel Conveyor,

Inventory Number
Model Q300, Serial Number QM021044, Factory rated 25-35 loads per hour, Maximum Load Wrap Height 80”, Maximum Load Weight 4000 lbs, 20” Film Web Width, Electrical 120 Volt, 1 Ph, 60 Hz, Low Profile, Includes (2) Ramps

‍

Inventory Number: 50096

Aperture Size 5” Wide x 10” Tall x 14” Long, Aperture Clearance 5” Wide x 9” Tall, 3” Wide x 72” Long Powered Conveyor with Plastic Conveyor Belt

‍

Inventory Number: 50218

‍

Model Portable Filler/Capper, Monobloc 1/1 Filler-Capper, 1-Head Piston Filler Doser, Filamatic Piston/Pump Size 130, 1-Head Rotary Cap Tightener, Stainless Steel Construction, Last Filling a 1.5” Round Bottle, Existing Capper Chuck for 28mm Screw Cap,

Model AWFS186R, Stainless Steel Construction, Gravity Type Rotary Bottle Filler with 18 Filling Valves, 6-Head Rotary Screw Capper for 28mm Flat Plastic Screw Caps,  Filler Specialties Waterfall Style Cap Sorter Feeder,

Inventory Number: 50216

‍
Model WLA-2 PRO-LABEL, Stainless Steel Construction, Left to Right Product Flow, Label Peel Plate 5” Tall, Label Size Range ½” – 10” Long, Product/Container Width ½” – 6”, Wipe On Label Application, Speed Controls, 6” Wide x 72” Long Powered Conveyor,

Inventory Number: 50213

‍
Model Number UN36, 36” Diameter Stainless Steel Top Disc, 3” Stainless Steel Side Table Guide Rails, Stainless Steel Construction, Variable Speed Drive,

Inventory Number: 50214

‍
Model Number ECOCAP4-C, Stainless Steel Construction, 8 Capping Spindles – Quill Wheels, Adjustable Cap Chute, Vibratory Cap Sorter, “C” Frame Design for Easy Integration with Existing Conveyor,

‍

Inventory Number: 50222

‍

Model NQA20, Year 2017, Self-Contained Portable Air Cooled Water Chiller System, Cooling Capacity 20 Tons  , (2) 10 HP Compressors , (2) 4.3 HP Condenser Fans, (1) 10 HP Pump, Refrigerant: R-410A (18 lb), Minimum Temp. 20°F - Maximum Temp. 80°F

Inventory Number: 50234

‍

Tunnel Opening: 42” L x 17” W x 8.5” H, Stainless Steel Conveyor Belt Size: 60” L x15” W, Digital Temperature Controller, Tunnel Blower

Model: NINON, Year of manufacture 2019, Capable of applying upto 6.5” tall labels, Wipe On Label Application, Will apply spot, partial wrap or wrap around pressure sensitive labels, Container Encapsulator Wrap Station, Touch Screen Operator Interface, Powered 3.25” Widex 102” Long Stainless Steel Powered Conveyor

Inventory Number: 50220

‍

ModelNQA08, Serial Number 32849012010, Year of manufacture 2020, Self-Contained Portable Air Cooled Water Chiller System, Cooling Capacity 7.5 Tons  

Model FPR712-13, Stainless Steel Construction, Sterling Electric 3 HP Motor, 3490 RPM, Electrical 230/460 Volt, 3 Ph, Impeller Diameter 4.5”, 2” Inlet with TriClover TriClamp Connection, 1.5” Discharge with TriClover TriClamp Connection

Inventory Number: 50215

‍

Model HEAT TUNNEL 36”, Stainless Steel Tunnel, Tunnel Opening 6” Wide x 9” Tall x 36” Long, Suitable for Neck Banding or Full Body Sleeving, Motorized Height Adjustment Fits Over Existing Conveyors,

Inventory Number: 50005

Model Number PD 700 MB, (2) Labeling Heads for Body & Neck Labels, Will apply spot, partial wrap or wrap around pressure sensitive labels in addition to neck labels, 4.5” Tall x 14” Long Wrap Belt Station, Trunnion Style Label Wrapping, Hot Stamp Coder attachment for Lot/Date Info, Starwheel Container Spacing Indexing Wheel, 4.5” Wide x 120” Long Powered Conveyor,

INVENTORY NUMBER 50006

Model Omni-Line M500 SSD, Stainless Steel Frame Construction, Factory rated speeds up to 450 bpm, Bottle Size Range (Min-Max) .0oz (25ml) – 2.5gal (9.5L), 60 Inch Diameter Sorting Bowl Disc, Includes PACE 200 Cubic Foot Stainless Steel Hopper Elevator,

‍

Model Number: COMPULABE LH Applicator, Left to Right Product Flow , Capable of applying up to 6.5” tall labels, Label Roll Unwind Position #4, 4" Wide x 72" Long Stainless Steel Powered Conveyor, Model TA6 Powered Label Wrap Unit 16” L x 6” H,

Inventory Number: 50010

Model UNSCRAMBLER, Manufacturer: Simplex Filler Company, Napa CA, 60-Inch Diameter Stainless Steel Top, Stainless Steel Side Covers, Mild Steel Painted Frame

‍

Inventory Number: 50011

Series 605, 12-Station Rotary Labeler with 7.25" Pitch, (2) labeling modules for pressure sensitive labeling, Capable of front, front & back or wrap around labeling, Capable up to 4.75" Label Height, Left to Right (Clockwise) Operation

Inventory Number: 50012

Model Number RP2514BFT, Left to Right (Clockwise) Operation, Capable of Bottom Up Filling, Timing Screw Container Infeed, 4.5” Wide x 120” Long Stainless Steel Pull Through Conveyor, Sanitary Stainless Steel Pistons

Inventory Number: 50013

Model FPD4PERI Peristaltic Filler, Stainless Steel Construction, (8) Filling Nozzles, 50 Gallon Product Tank, MasterFlex Peristaltic Pumps, Operator Touch Screen Interface Control Panel, 4.5” Wide x 120”Long Powered Stainless Steel Conveyor with Plastic Belting

Model ProCarb 60, Year 2021, Stainless Steel Construction, ProCarb 60 Inline Carbonation System, ASME Rated 100 psi Product Buffer Tank, 100 Gallon, Single Wall Vessel,

Inventory Number: 50015

‍

Model SK8000-SP, Serial Number IN16256, Stainless Steel Construction , 8 Capping Spindle – Quill Wheels, Adjustable Cap Chute (18mm to 120mm), “C” Frame Design for Easy Integration with Existing Conveyor, Left to Right Container Flow

‍

Inventory Number: 50016

‍

Single Deck, Model PRO/LINE™ 424, Year 2014, PRO Engineering/Manufacturing Inc., Milwaukee Wisconsin, Bed Size 4 Feet Wide x 24 Feet Long, 304L Stainless Steel Construction, Plastic Raised Rib Type Conveyor Belting, 4-Zones, Air Blast Discharge Container Blow Off - Air Knife,

Inventory Number: 50017

‍

MicroBlend deaeration technology greatly reduces oxygen and nitrogen levels in the blended product,down as low as parts-per-billion levels without the use of water deaeration, reducing processing hardware; vacuumpumps, vessels and membranes no longer needed. Multi-stream Blending is achieved using Micro-Motion Mass Flow Meters enabling the addition of multiple streams of flavors and ingredients more accurately to the finished product. The In-Line Carbonating feature allows you to carbonate your product to a specified volume of CO2 set at the touch panel. The ILC measures incoming GPM, temperature, pressure,and required CO2 volume; then calculates the amount of CO2 needed to be injected through a sparging tube into the product while controlling backpressure. Carbonated soft drink blenders offer optional CO2 or N2 injection with water deaeration and product chilling- Hot fill and non-carbonated blenders are manufactured without the gas injection, deaeration, and product chilling, Multi-stream blenders enable the addition of multiple streams of flavors and ingredients to the finished product

Inventory Number: 50018

‍

Model NT, New 2021, Manufacturer: Inline Filling Systems Inc, Stainless Steel Frame Construction, Right to Left Operation, Last Running 28mm & 38mm plastic screw caps, Adjustable Cap Chute, Touch Screen Operator Interface, Variable Speed Controls, Waterfall Style Cap Sorter-Feeder,  

Inventory Number: 50019

‍

Model40-Inch Table, Manufacturer: E-PAK Machinery Inc, Stainless Steel Construction, 40” Diameter Stainless Steel Top Disc, Penta-Drive Speed Controller with On/Off,  Electrical 110 Volt, 1 Ph, 60 Hz  

‍

Inventory Number: 50021

‍

Series 605, Serial Number K403018, Year 2013, (2) labeling modules for pressure sensitive labeling, Capable of front, front & back or wrap around labeling, Krones Checkmat Label Inspection, Keyence Electronic Bottle/Container Orientation

Inventory Number: 50022

‍

Model60 TT ACC, Stainless Steel Construction, 60” Diameter Stainless Steel Top Disc, Speed Controller with On/Off , Electrical 110 Volt, 1 Ph, 60 Hz  

‍

Inventory Number: 50024

‍

Powered Conveyor Section, Stainless Steel Construction, 4” Wide Plastic Table Top Belt, Adjustable Conveyor Guide Rails, Variable Speed Controls, Electrical 110 Volt, 1 Ph,

Inventory Number: 50026(A/B)

‍

Automatic Feeder Company Inc, Stainless Steel Construction, Hopper Measurements 42” L x 42” W x 26” Deep, Approximately 20 Cubic Feet Capacity, 9” Wide Cleated Belt with 2” Tall Cleats 6” On Center, Dimension Floor to Cap Discharge Height 90” +/-,

Inventory Number: 50027

‍

Model 4 Spindle Capper, 8 Capping Quill Wheels, Stainless Steel Frame Construction, Right to Left Container Flow , Adjustable Cap Chute (up to 120mm diameter caps),  Includes E-PAK Waterfall Style Cap Hopper Sorter, Model Cap Sorting Elevator, 10” Wide Cleated Belt, 3.25” Distance Between Cleats, Adjustable Cap Discharge Chute - Adjustable Cap Discharge Heights,

Inventory Number: 50028

‍

Series 605, Capable of front, front & back or wrap around labeling, Right to Left Operation, Keyence Electronic Bottle/Container Orientation, Touch screen operator interface, Allen Bradley controls, Includes existing change parts,

Inventory Number: 50029

‍

Model Mini Pal, Factory Rated 12 CPM, 72” Max Pallet Height, Standard Layer Weight – 300 lbs, Case Infeed Metering Conveyor

Inventory Number: 50014

Model ProCarb 60 Carbonation System, Year 2021, Product Buffer Tank 100 Gallon, Upgrade to Mass Flowmeters - CIP Pump, Alfa Laval Glycol Heat Exchanger, Blend Stream

‍

Inventory Number: 50031

‍

Model Number Paradigm700, Stainless Steel Frame Construction, Capable of applying 1” to 5” tall labels, Present Label Peel Plate 5” tall, Will apply spot, partial wrap or wrap around pressure sensitive labels, Hot Stamp Coder attachment, Container Spacer / Indexing Wheel,

Inventory Number: 50032

‍

Model Number FS-12, Cleated Belt Waterfall Style Cap Sorter Elevator Feeder, Stainless Steel Hopper Construction, Mild Steel Painted Bottom Base, 12” Wide Cleated Belt with Adjustable Cleat Locations, Adjustable Cap Discharge Chute for larger diameter caps up to 4.5” (120mm),

Inventory Number: 50033

‍

Model Number 8440, Stainless Steel Construction, Rated up to 120 bottles per minute, Left to Right Container Flow, Cotton Length Range 5 – 22 cm (2 – 9”), Adjustable for cycle speed, cotton feed length, Pneumatic Gating Container Indexing

Inventory Number: 50033

‍

Model NT, Stainless Steel Frame Construction, Adjustable Cap Chute, Cap Size Ranges up to 120mm, Side Grip Belts, Electronic Height Adjustment, Left to Right Operation.

Inventory Number: 50035

‍

ModelNumber A-2, 6-Quill/Spindle Screw Capping Machine, Stainless Steel Construction, 24” Rotary Cap Sorter, Adjustable Cap Chute (24mm to 76mm sizes), Integrated Bulk Cap Hopper Elevator Feeder

Inventory Number: 50036

‍

Pneumatic Drive with Foot Petal Switch, Semi-Automatic Operation, Stainless Steel Frame Construction, 5/16” Diameter Filling Nozzle, Piston Dimension 1.25” Diameter x 16” Long, Stainless Steel Hopper, 9” diameter x 9” deep, Hopper Agitator-Mixer (110 Volt, 1 Ph, 60 Hz)

Inventory Number: 50037

‍

Vertical Cylindrical Storage Tank with Dome Top & Dish Bottom, 58” Diameter x 104” Overall Height, Side Clamping Gasketed Manway Door, 20” L x 16” H, (4) Stainless Steel Legs x 18” L

Inventory Number: 50039

‍

Stainless Steel Frame Construction, 48” Diameter UMHW Plastic Top Disc, DC Drive with Variable Speed Control

Inventory Number: 50040

‍

Model TDC0018, Type: Combiner, Serial Number 904835-SMMM0327, Year 2007, Table Size 96” Long x 64” Wide, 36” Wide Case Slats, Present Conveyor Height 30” (adjustable),

​

Inventory Number: 50041

‍

Model Number SHA600 (B-600), Left to Right or Right to Left Container Flow, 16 Gallon Capacity Stainless Steel Hopper with Cover, 4-Head Filling Manifold Adaptor, Factory rated production speeds up to 120 CPM dependent on material & application, Last used in the food industry,

‍Inventory Number: 50042

‍

(1) Labeling Head for Spot or Wrap Around Labeling, Capable up to 7.25” Tall Labels max., Stainless Steel Construction, 3.25” Wide x 94” Long Stainless Steel Conveyor with Plastic Belting, (2) Infeed Container Spacing Separation Indexing Wheels, Powered Wrap Station 6” Tall x 16” Long with Foam Backing Plate, Dual Chain Type Container Centering Device, Top Container Hold Down Belt x 30” Long, SelfSet® Auto Adjusting Set Up Operator Controls and E-Stop, 

Inventory Number: 50043

‍

3M-Matic Side Belt Adjustable Case Sealer, Dual Side Case Gripper Belts, (2) AccuGlide 2-Inch Case Tape Heads for Top & Bottom Case Sealing, Factory Rated Speeds up to 28 boxes per minute (depending on box size).

Inventory Number: 50044

‍

Model Number BAO 5000, Factory rated speeds (up to) 450 BPM, Bottle Size Range (Min-Max) .33 oz (10mL) to 2.5 gallons (9.5L), Container Shapes; Off-center neck bottles, handle bottles, trigger spray bottles, symmetrical bottles with in-mold labels,  Center neck non-symmetrical bottles, Powered Conveyor with 4.5” Wide Plastic Table Top Belt

Inventory Number: 50045

‍

Model Number SUPERTAPER 1M, Mainly Stainless Steel Construction, Capable of Bottom Case Sealing, Includes (1) Tape Heads for Bottom Case Sealing, 2” Standard Tape Head

Inventory Number: 50046

‍

275 Gallon (1040 Liters) Volume – Capacity, Manufacturer: Clawson Container Company, Clarkston Michigan, Material 304 SS, Design 9 PSIG, Rated 401 Lbs Tare Weight, Rated 3701 Lbs Gross Weight, 22” Top Manhole Opening, Sloped Bottom to a 1.5” Discharge Outlet with TriClover TriClamp Connection,

Inventory Number: 50047

‍

Lot of 8 heads, Includes pressure blocks, push out rods, spreader inserts, assembly jig,

Inventory Number: 50048

‍

New 2011, In-line design allows closing and sealing without carton turning, reducing potential for malfunctions and costly downtime, Speeds of up to 90 cartons per minute, Nordson Hot Glue System,

Inventory Number: 50049

‍

Model Number SUPERTAPER 1M, Mostly Stainless Steel Construction, Capable of Top & Bottom Case Sealing, Presently set for Top Case Sealing only, Includes (1) Tape Heads for Bottom Case Sealing, 2” Standard Tape Head

Inventory Number: 50050

‍

Model Bottle Blower, (10) Station Rinser with Diving Nozzles on a 46” long Bracket, HERBERT Static Eliminator , Cincinnati Dust-Master 1 HP Vacuum System, Model 100S/T1, Adjustable Nozzles for Various Size Containers,

Inventory Number: 50052

‍

Serial Number 4172, National Board Number 4173, Max Working Pressure 350 PSIG @ 300 Deg F, Filter Housing Dimensions 12" Diameter x 72" High

Inventory Number: 50053

‍

‍

Inventory Number: 50054

‍

Stainless Steel Construction, 42 Inch Diameter Stainless Steel Rotary Turntable, Center Guide, 1.25” Tall Stainless Steel Side Guide Rail, Stainless Steel Side Table 16” Wide x 28” Long,

Inventory Number: 50055

‍

6” Wide Smooth White Belt x 144” Long, 36” Conveyor Elevation (adjustable), Stainless Steel 3” Tall Side Guide Rails, 7.5” Distance Between Side Guide Rails

Inventory Number: 50056

‍

‍

Inventory Number: 50057

‍

Condition: New, Never Used, Model Number XJ65, Lightnin Classic Gear Drive Mixer, CW – Clockwise Rotation, 65 HP Drive Motor, Clamp On Type Mixer, 72” Long x .75” Diameter Stainless Steel Shaft, Electrical 208-230/460 Volt, 3 Ph, 60 Hz, 2.6-2.8/1.4 Amps

Inventory Number: 50058

‍

Pneumatic Operation, Adjustable for various size RSC corrugated boxes,

Inventory Number: 50059

‍

Semi-Automatic Tilting Case Former and Packing Station Erects RSC Cases, Designed for operator ease of packing products, Pneumatic Operation with E-Stop, Ergonomic Tilting Function, 

Inventory Number: 50060

‍

Model Number TDC/3-10, 10 Quart Capacity, Stainless Steel Foodgrade Construction, Tilting Kettle with Trough Shaped Pouring Lip, 2/3 Steam Jacketed Kettle with Hemispherical Bottom, Direct Steam Operated, Lightnin Model L1U08F Portable Mixer, 

Inventory Number: 50061

‍

Part Number SM2-3, 36” Strainer, 2.25 Ft/2 Strainer Area, 3” Tri-Clover Tri-Clamp Connections, Sanitary Stainless Steel Construction,

Inventory Number: 50062

‍

275 Gallon (1040 Liters) Volume – Capacity, Manufacturer: Clawson Container Company, Clarkston Michigan, Material 304 SS, Design 9 PSIG, Rated 401 Lbs Tare Weight, Rated 3701 Lbs Gross Weight, 22” Top Manhole Opening, Sloped Bottom to a 1.5” Discharge Outlet with TriClover TriClamp Connection,

Inventory Number: 50063

‍

Model Number DFNH-4000-MHI, Input 4,000,000 BTU/hr, Output 3,400,000 BTU/hr, Natural Gas, Maximum Water Temp. 250 Deg. F.

Inventory Number: 50065

‍

Approximately 60 Cubic Feet Capacity, Stainless Steel Hopper Construction, Mild Steel Painted Base Frame, 12” Wide Cleated Belt with 10” Wide x 3” Tall Cleats 6.25” On Center, Dimension Floor to Cap Discharge Height 100” +/-,

Inventory Number: 50066

‍

Model 6X2-3, Liquid Flow 5 GPM, Temp. Rise 4 - 44 Deg F , Steam Pressure 70 PSIG, Water Pressure 50 PSIG, Constant Flow, ½ HP Pump, 3450 RPM, Electrical 115/230 Volt, 1 Ph, 60 Hz, 7.4/3.7 Amp

Inventory Number: 50067

‍

Capacity 200 Gallons, Inside Tank Dimensions 36” Diameter x 54” Deep, Single Wall Stainless Steel Sanitary Construction, Bolt On Removable Top Cover Lid with ¼ Hinged Access, Coned bottom to 3" center outlet,

Model Number H-5836, Stainless Steel Washdown, Water Resistant, Platform Size 16” x 20”, Capacity/Accuracy 100 lbs. / .02 lb.

Inventory Number: 50068

‍

Model F-4, Serial Number 3690, Stainless Steel Construction Frame, 4 Spindle - Capping Quill Wheels, Left to Right Operation, Container Stabilizer Belts, Electronic Height Adjustment

Inventory Number: 50069

‍

Model ATMOS-250, 250 Gallon Capacity Vertical Mixing Tank, Sanitary Stainless Steel Foodgrade Construction, Dome Top with (5) 2” Inlets, Coned Bottom to 3” Center Discharge Outlet, Jacket Design Pressure 150 PSIG, Jacket Design Temperature 366° F, Top Entering Scrape Surface Agitation, 2 HP Agitation Drive Motor,

Inventory Number: 50070

‍

- Stainless Steel Frame Construction, 12-Inch Wide Plastic Flex Table Top Chain Belt, 12” Wide x 9’ Long “S” Shape Conveyor, Right Hand,

Inventory Number: 50071

‍

60 Liter (15 Gallon) Capacity (approx.), Interior Vessel Dimensions 14” Diameter x 24” Deep, MAWP 25 PSIG @ 350 Deg. F., MDMT -20 Deg. F. @ 25 PSIG, Top Center Clamp On Lightnin Mixer, Model EV1L25, Reliance ¼ HP Mixer Motor, 1725 RPM, 115/230 Volt, 1 Ph, 60 Hz, 4.4/2.2 Amps

Inventory Number: 50073

‍

Lightnin Ultramix Gear Motor .25 HP, Electrical 208-230/460 Volt, 3 Ph, 60 Hz, 1725 , Overall Dimensions 36” High, Flange Mount 11” Diameter with (8) ¾” mounting bolt holes, Includes 1” Diameter Stainless Steel Mixer Shaft x 72” Long

Inventory Number: 50074

‍

3.25” Wide x 114” Long, 36” Conveyor Elevation, Mild Steel Painted Frame and Legs, Electrical 230/460 Volt, 3 Ph, 60 Hz

Inventory Number: 50075

‍

Model JFPD-075-20, Dayton .5 HP Stainless Steel Washdown Motor, 1745 RPM, Sanitary Foodgrade Stainless Steel Pump Head, 2" Inlet with Tri-Clover Tri-Clamp Fitting, 2" Discharge with Tri-Clover Tri-Clamp Fitting

Inventory Number: 50077

‍

Presently set for 28mm ROPP aluminum beverage caps

Inventory Number: 50078

‍

36” Diameter Sorting Bowl Disc, Right-Hand Configuration (Left to Right Container Flow), Factory Rated Speeds (up to) 250 CPM, Includes 30 cubic foot hopper elevator,

​

​

​

​

Inventory Number: 50079

‍

Smooth Belt 8” Wide x 36” Long, Adjustable Conveyor Guiderails, Baldor ½ HP Drive Motor

Inventory Number: 50080

‍

Automatic High Speed Top Case Sealer, Pneumatic Rear Flap Tucker, Powered Case Compression Belt, Adjustable for various size RSC corrugated boxes Case range; Case Length: Min. 8”, Max. 24, Case Width: Min. 6”, Max. 17”, Case Height: Min. 4”, Max. 17”, Nordson Series 2302 Hot Melt Glue System

Inventory Number: 50081

‍

Model Number 300E, Speed: up to 22 cases per minute, Nordson 3400 VISTA Hot Glue Unit

Inventory Number: 50082

‍

‍

Inventory Number: 50083

‍

Model Paradigm 700, Capable of applying labels 1” to 4.5” tall & up to 12” long, 1.5” Wide x 120” Long Powered Conveyor with Plastic Belt, Top Container Hold Down Belt, Dual Timing Screw Container Infeed Indexing,

Inventory Number: 50084

‍

Model P-4-H Compact Unscrambler, Fully Automatic Empty Bottle Unscrambler, Stainless Steel Construction, 48” Diameter Orienting Disc Sorter Bowl, Integrated Hopper Elevator with Live Bottom Pre-Feed, 24 Cubic Foot Capacity, To include (1) new set change parts per customers sample bottles, 

Inventory Number: 50085

‍

Model Number 6-STSPLMDS 10, Serial Number 3-23471-03, 6 Inch Horizontal Dual Stage High Shear Continuous In-Line Pipeline Mixer, Product Description: Machine will blend, emulsify, de-agglomerate and produce a thorough wetting of dispersed substances resulting in a completely homogenous product, Dual Stage (Tandem) Stainless Steel Mixing Head with 6” Diameter Stator / Turbine, 3” Inlet & 3” Discharge with TriClamp Connections, Direct Drive Baldor-Reliance Severe Duty 40 HP Drive Motor, 3560 RPM,